Costumized solutions for the treatment of processing waste
Home Metal chips

Home Metal chips
Metal chips

Centrifuges

FC500

Automatic centrifuge
600 ÷ 2000 kg/h
Metal chips

Automatic centrifuge ideal for separating and recovering the cooling lubricant.

It is a centrifuge suitable for large volumes of chips, ideal both for being integrated in a treatment group and for being fed by a loading hopper. Download from the bottom.


FC500
  • Structure made of sturdy painted metalwork RAL 7016, anchored to a thick and rigid platform
  • Basket made from a block of special steel turned on a CNC machine and heat treated
  • Parts in contact with the chip made of special anti-wear materials
  • Anti-vibration dampers to reduce vibrations
  • Reduced dimensions
  • High efficiency
  • Easily replaceable slotted filter ring with differentiated holes

The FC500 centrifuge is a unit suitable for centrifuging metal, ferrous and non-ferrous swarf, in order to recover the cooling lubricant used by the machine tool in the production process.

The FC500 centrifuge is designed for continuous feeding and for the treatment of short swarf, not exceeding 2 cm in length.

Under optimal conditions, the FC500 centrifuge allows to obtain swarf with a wet content that can reach up to 1.5%.

The actual efficiency of the centrifuge, as well as the actual hourly flow rate, depends on the characteristics of the swarf, in particular the material, the shape, the weight per unit of volume, as well as the starting humidity and can be confirmed by testing your swarf at our premises. If there are pieces in the swarf, such as bar headers, semi-finished products or bar ends, the FC500 centrifuge should be equipped with a sieve.

 

 


EXPLORE

download FC500 automatic centrifuge product sheet [ pdf - 1951 Kb ]

DIMENSIONS Ø X H
1250 X 1100 mm
POWER
4 kW
VOLTAGE
230/400 V
POWER SUPPLY
Continuous
RPM
1.480 rpm
WEIGHT
600 kg
HOURLY PRODUCTION

Q = 1500 l/h Brass Steel Aluminium Stainless steel Copper Cast iron
density [kg/l] 1,30 1,20 0,40 1,00 0,80 1,30
Kg/h 2000 1800 600 1500 1200 2000

The data in kg/h is approximate and in any case depends on the density of the swarf, the shape, the oil content and the type of coolant. the density data considered are hypothetical, based on an experimental average of the data in our possession.

POSSIBLE APPLICATIONS

AVAILABLE OPTIONAL
FURTHER TECHNICAL <b>CARACTERISTICS</b>
FURTHER TECHNICAL CARACTERISTICS
  1. In order to optimize the de-oiling result, the machine should be equipped with an inverter.
  2. The cycle can be controlled by a logo or a PLC.
  3. It is essential to equip the centrifuge with a washing pump which will be installed on the coolant recovery tank as to prevent the accumulation of sludge in the fluid discharge channel and avoiding its clogging.
  4. The swarf must be short or not larger in size than 2 x 1 or 2 cm.
  5. The swarf must not contain pieces (end of bar, bar headers, processed parts, ...). Pieces in the order of cm are tolerated.
  6. The centrifuge must be loaded continuously and uniformly to ensure maximum performance.

OTHER PRODUCTS IN THE RANGE

FC200

Automatic centrifuge
70 ÷ 200 kg/h

FC300

Automatic centrifuge
160 ÷ 500 kg/h

FCM 31-61

Deoiling centrifuge with extractable basket
Basket Ø300-600

FCM 65-80

Deoiling centrifuges with extractable basket
Basket Ø650-800

Systems
Crushers