Costumized solutions for the treatment of processing waste
Automatic centrifuge for metal chips suitable for separating and recovering the cooling lubricant.
It is a medium centrifuge, ideal to be integrated in a treatment group. The discharge of the treated chip is located in the bottom of the centrifuge.
The FC300 centrifuge is a unit suitable for centrifuging metal, ferrous and non-ferrous swarf, in order to recover the cooling lubricant used by the machine tool in the production process.
The FC300 centrifuge is designed for continuous feeding and for the treatment of short swarf, not exceeding 2 cm in length.
Under optimal conditions, the FC300 centrifuge allows to obtain swarf with a wet content that can reach up to 1.5%.
The actual efficiency of the centrifuge, as well as the actual hourly flow rate, depends on the characteristics of the swarf, in particular the material, the shape, the weight per unit of volume, as well as the starting humidity and can be confirmed by testing your swarf at our premises. If there are pieces in the swarf, such as bar headers, semi-finished products or bar ends, the FC300 centrifuge should be equipped with a sieve.
EXPLORE
download FC300 automatic centrifuge product sheet [ pdf - 2019 Kb ]
| HOURLY PRODUCTION |
| Q = 400 l/h | Brass | Steel | Aluminium | Stainless steel | Copper | Cast iron |
| density [kg/dmc] | 1,30 | 1,20 | 0,40 | 1,00 | 0,80 | 1,30 |
| Kg/h | 500 | 480 | 160 | 400 | 320 | 500 |
The data in kg/h is approximate and in any case depends on the density of the swarf, the shape, the oil content and the type of coolant. the density data considered are hypothetical, based on an experimental average of the data in our possession.
